Skip to content

mod_register

Module Description

This module implements XEP-0077: In-Band Registration, allowing users to register accounts on the server via XMPP. Use of this module on Internet-facing servers is not recommended.

Options

modules.mod_register.iqdisc.type

  • Syntax: string, one of "one_queue", "no_queue", "queues", "parallel"
  • Default: "one_queue"

Strategy to handle incoming stanzas. For details, please refer to IQ processing policies.

modules.mod_register.access

  • Syntax: string, rule name or "all"
  • Default: "all"
  • Example: access = "all"

Defines which access rule should be used for checking if a chosen username is allowed for registration.

modules.mod_register.welcome_message

  • Syntax: TOML table with the following keys: "body", "subject" and string values.
  • Default: {subject = "", body = ""}
  • Example: welcome_message = {subject = "Hello from MIM!", body = "Message body."}

Body and subject of a <message> stanza sent to new users. Only one of the fields (but non-empty) is mandatory for the message to be sent.

modules.mod_register.registration_watchers

  • Syntax: array of strings
  • Default: []
  • Example: registration_watchers = ["JID1", "JID2"]

List of JIDs, which should receive a <message> notification about every successful registration.

modules.mod_register.password_strength

  • Syntax: non-negative integer
  • Default: 0
  • Example: password_strength = 32

Specifies minimal entropy of allowed password. Entropy is measured with ejabberd_auth:entropy/1. When set to 0, the password strength is not checked. Recommended minimum is 32. The entropy calculation algorithm is described in a section below.

modules.mod_register.ip_access

  • Syntax: Array of TOML tables with the following mandatory content:

    • address - string, IP address
    • policy - string, one of: "allow", "deny".
  • Default: []

  • Example: ip_access = [ {address = "127.0.0.0/8", policy = "allow"}, {address = "0.0.0.0/0", policy = "deny"} ]

Access list for specified IPs or networks. Default value allows registration from every IP.

Example configuration

Allow registrations from localhost:

1
2
3
4
5
6
[modules.mod_register]
  welcome_message = {subject = "Hello from MIM!", body = "Message body."}
  ip_access = [
    {address = "127.0.0.1", policy = "allow"}
  ]
  access = "register"

Deny registration from network 10.20.0.0 with mask 255.255.0.0.

1
2
3
4
[modules.mod_register]
  ip_access = [
    {address = "10.20.0.0/16", policy = "deny"}
  ]

Metrics

There are no metrics specific to this module.

Entropy calculation algorithm

1
Entropy = length(Password) * log(X) / log(2)

Where X is initially set to 0 and certain values are added if at least one of these bytes are present:

  • Lower case character: 26
  • Upper case character: 26
  • Digit: 9
  • Printable ASCII (0x21 - 0x7e): 33
  • Any other value: 128

Note

These values are added only once, no matter how many bytes of specific type are found.

Example entropies

  • kotek: ~23.5
  • abc123: ~30.8
  • L33tSp34k: ~53.4
  • CamelCase: ~51.3
  • lowUP1#:: ~45.9
  • lowUP1#❤: ~78